The depth of the flange against the hull is 0.30 mm. The inner diameter of #3DBenchy’s hawsepipe measures 4.00 mm. The box on #3DBenchy’s deck measures 12.00 x 10.81 mm on the outside and 8.00 x 7.00 mm on the inside. The top of the box measures 15.50 mm above the bottom surface. #3DBenchy’s vertical overall-height from top to bottom measures 48.00 mm. #3DBenchy’s horizontal overall-width from port to starboard measures 31.00 mm. #3DBenchy’s horizontal overall-length from bow to stern measures 60.00 mm. The depth of the blind hole measures 11.00 mm. The cylindrical hole and outer top part of the chimney measure 3.00 and 7.00 mm in diameter. The front and rear surfaces of the roof are parallel at a distance of 23.00 mm. Regardless of how well #3DBenchy 3D-prints on a certain 3D printer, it is a valuable tool for comparing results between several different 3D printers, assuming that similar print settings where used. Print and check your 3D-printer’s result for dimensional accuracy, tolerances, warping and deviations related to changes in printing parameters and material types. These are easy to measure with a caliper. Compare your #3DBenchy results with the dimensions illustrated below. The shape and size of this 3D model is designed to challenge 3D printers. Use #3DBenchy to test and calibrate your 3D printer by adjusting hardware and software settings for optimal results.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |